Pennsylvania’s New Elevator Code: What Building Owners Need to Know for 2027
Pennsylvania’s updated elevator safety code takes effect December 20, 2026, bringing important changes to testing requirements for many elevators and other conveyances. Building owners and property managers should begin preparing now to understand the impact on their maintenance schedules, inspection coordination, and operating budgets.
Under the updated requirements, annual Category 1 (CAT1) testing will apply to applicable hydraulic elevators, traction elevators, and escalators beginning in 2027. Equipment that previously followed a three-year testing cycle may now require more frequent testing, potentially increasing the cost of maintaining compliance.
At Delco Lift LLC, we believe building owners deserve clear information, dependable service, and fair pricing. Understanding these changes ahead of time can help you avoid unexpected expenses and keep your equipment operating safely and in compliance.
What Is Changing Under Pennsylvania’s New Elevator Code?
Pennsylvania is adopting ASME A17.1-2016, with the new requirements becoming effective December 20, 2026. Building owners should prepare for several important changes.
Key changes include:
-
Annual CAT1 testing: Applicable hydraulic elevators, traction elevators, and escalators will be subject to annual testing requirements.
-
Existing routine inspections remain: The requirement for two routine inspections per year continues. Annual CAT1 testing does not replace either inspection.
-
Changes to three-year testing: The previous three-year testing and witnessing cycle will no longer apply in the same manner under the updated requirements.
-
Additional coordination: Certain tests involving fire alarm systems, smoke and heat detectors, and standby generators may require additional personnel to be present.
-
Potential cost increases: More frequent testing and additional coordination may increase the overall cost of elevator compliance.
Because requirements can vary by equipment type and applicable state guidance, building owners should confirm which provisions apply to their specific elevators and lifts.
Which Elevator Inspection Requirements Will Remain in Place?
Although testing requirements are changing, several existing obligations will continue.
Building owners should plan to maintain:
-
Two routine elevator inspections annually.
-
Required Category 5 (CAT5) testing for applicable equipment at the prescribed interval.
-
Coordination with the elevator service company and qualified inspector for required witnessed tests.
The annual CAT1 test will generally be coordinated with one of the regularly scheduled inspection visits. The second routine inspection will still be required.
When Should Building Owners Schedule Annual CAT1 Testing?
The new code takes effect on December 20, 2026, making 2027 an important year for planning and implementation.
Building owners should contact their elevator service provider before the end of 2026 to review their current testing history, identify upcoming requirements, and establish a schedule for the year ahead.
Even if your elevator recently completed a three-year test, you should not assume that the previous testing cycle will carry forward unchanged. The applicable requirements and timing should be confirmed for your equipment.
Early planning can help prevent scheduling conflicts, avoid unnecessary delays, and give property managers more time to account for testing expenses.
How Will the Changes Affect Hydraulic and Traction Elevators?
The updated requirements affect equipment differently depending on its type.
Hydraulic elevators: Applicable equipment will move to annual CAT1 testing, including the required testing of hydraulic systems as specified by the applicable code.
Traction elevators: Annual CAT1 testing will be required for applicable equipment. The annual CAT1 test is a no-load test, while the applicable CAT5 test remains the five-year full-load test.
Escalators: Applicable escalators will also be subject to annual CAT1 testing.
Since not all equipment has the same testing requirements, it is important to review your elevator records and confirm the applicable schedule with your service provider and inspector.
Who Needs to Be Present During Elevator Testing?
Successful completion of witnessed testing requires coordination between the elevator service provider and the qualified inspector.
Depending on the equipment and building systems, other contractors may also need to participate. These may include:
-
The building’s fire alarm contractor.
-
Personnel qualified to support standby generator or emergency power testing.
-
Other service providers responsible for applicable life safety systems.
Building owners and property managers should arrange for the necessary personnel to be available at the scheduled time. If required portions of a test cannot be completed, additional scheduling, costs, or repeat testing may result.
Confirming these arrangements in advance can help keep the process organized and reduce disruption to tenants and building operations.
Will the New Code Affect Wheelchair Lifts and Dumbwaiters?
Not every lift or conveyance will be affected in the same way.
Requirements depend on the equipment classification, its installed systems, and the testing obligations that apply to it. Some wheelchair lifts, platform lifts, and dumbwaiters may have different inspection and testing requirements from conventional passenger elevators.
Property owners should have their equipment evaluated rather than assume that every lift will require the same annual CAT1 testing.
What About Elevator Modernizations and New Installations?
Owners planning a new installation or modernization should discuss the applicable code requirements with their elevator contractor before finalizing a project.
The code edition governing a project may depend on factors such as permit approval and the requirements applicable to that installation. Updated code provisions may affect equipment specifications, controller designs, fixtures, and project costs.
Planning ahead can help prevent unexpected changes during construction and ensure that the project is designed to meet the applicable requirements.
How Can Building Owners Prepare for the 2027 Changes?
The best time to prepare is before the new requirements begin affecting your annual maintenance and testing budget.
We recommend taking the following steps:
-
Review your maintenance agreement. Determine which testing and inspection services are included and which are billed separately.
-
Check your testing records. Identify the last CAT1, CAT5, and other applicable tests performed on each unit.
-
Contact your elevator service provider. Confirm which new requirements apply to your equipment and when testing should be scheduled.
-
Coordinate with your inspector. Establish a schedule for required witnessed testing and any necessary building-system support.
-
Update your 2027 budget. Account for potential changes in testing frequency, labor, inspection fees, and contractor coordination.
-
Compare service proposals. Review what each proposal includes so you can make an informed decision about cost and coverage.
Taking these steps now can help building owners maintain compliance while reducing the risk of last-minute expenses and scheduling problems.
How Delco Lift LLC Can Help
At Delcolift LLC, we understand that code changes can create additional challenges for property managers and building owners. Our goal is to help you understand your equipment’s needs, plan for required testing, and control service costs without compromising quality or safety.
As a local, family-owned and operated elevator service company built on more than 20 years of industry experience, we offer practical knowledge, honest recommendations, and competitive pricing.
We can help you review your elevator service needs, plan for upcoming testing, and identify opportunities to manage your maintenance budget. We also specialize in servicing older and obsolete elevator equipment, including units that can be difficult to maintain because of discontinued parts or outdated controls.
Don’t wait until 2027 to find out how the new requirements may affect your building. Contact Delcolift LLC to discuss your elevators, review your upcoming testing needs, and plan ahead for the code changes.
Delcolift LLC
Elevator service you can depend on.
Phone: 484-319-0337
Email: info@delcolift.com
Website: www.delcolift.com
Frequently Asked Questions
When does Pennsylvania’s new elevator code take effect?
The updated code, ASME A17.1-2016, takes effect December 20, 2026. Building owners should prepare for implementation of applicable new testing requirements beginning in 2027.
Will elevators need CAT1 testing every year?
Applicable hydraulic elevators, traction elevators, and escalators will be subject to annual CAT1 testing under the updated requirements.
Does annual CAT1 testing replace routine inspections?
No. Two routine inspections per year remain required. The annual CAT1 test will generally be coordinated with one of those visits.
Will annual testing increase elevator maintenance costs?
It may. More frequent testing, technician time, inspector witnessing, and coordination with other building contractors can increase expenses. Reviewing your service agreement and budget before 2027 can help you prepare.
Do traction elevators need a full-load test every year?
No. The annual CAT1 test for applicable traction elevators is a no-load test. CAT5 testing remains the five-year full-load test for applicable equipment.
Do all wheelchair lifts and dumbwaiters require annual CAT1 testing?
Not necessarily. Requirements vary according to equipment classification and applicable testing provisions. Confirm the requirements for your particular unit with your elevator service provider and inspector.
Should I contact my elevator company before 2027?
Yes. Reviewing your equipment records, service agreement, testing schedule, and budget in advance can help you prepare for the transition and avoid unexpected costs.
